BVR 1078 - Bonetti Deutschland  Verkauf

BVR 3/4",300 LB,A105

BODY PARTS: FORGED CARBON STEEL A105

JL1040

Chlorine VALVE DN25 PN 16

JL1040 CB504

DN25 PN16

KE800204 SGA0754 F05/F07 SW17

pneumatic actuator, single acting with NAMUR - connections G 1/4" with drlling ISO 5211-F05/F07, square Z=17mm, air supply pressure required: 5-6 bar, max. 10 bar

MAG210/G21

MAGNETIC LEVEL GAUGES FOR WATER / STEAM UP TO 210 BAR PRESSURE

P/N 114

stop valve bont type,WBY 1" ANSI 1500, MAT.SCH.71

P/N 115

DRAIN VALVE, BOLT TYPE, WBY 1/2" ANSI1500 S.W., MAT SCH.71

P/N 117

OVAL FLANGE M16,ASTM A 105

P/N 127

LOWER CROSS FITTING, ASTM A 105

P/N 127A

UPPER CROSS FITTING, ASTM A 105

P/N 128

BOLT M16, ASTM A 193 B7

P/N 131

METAL GASKET, TYPE 316

REFLEX BR28-G42

MAGNETIC LEVEL GAUGE, Material STAINLESS STEEL, Fluid WATER, Classification, areas ZONE 2 Temperature range, ambient 4 TO 57 °C, Temperature, fluid 52 °C, Humidity 50 TO 95 %, Tech ID, 067LG-31005/G, 067LG-33005/G

TP:B-7 79170 PIM

TP:B-9 79190 PIM

VK304150 (type BVR 1078, DN 3/4", Class 800)

(BONETTI piston valve with SW-ends type BVR 1078, DN 3/4", Class 800, reduced bore, material ASTM A105, valve rings reinforced lamellar graphite T1, SW-ends 3/4" acc.to ANSI B16.11, face to face dim.A=100mm)

WBY DN 1", ANSI 2700

BONT stop valve, mat.sch.22, SW seal welded bonnet, body ASTMA182 F22 + Stellite Gr.6, disk ASTMA182 F6 + Stellite Gr.6, with socket weld ends acc. to ANSI B16.11 execution acc. to fig. 6041

WBY DN 1/2", ANSI 2700

BONT stop valve, mat.sch.22, SW seal welded bonnet, body ASTMA182 F22 + Stellite Gr.6, disk ASTMA182 F6 + Stellite Gr.6, with socket weld ends acc. to ANSI B16.11 execution acc. to fig. 6041

WBY DN 3/4", ANSI 2700

BONT stop valve, mat.sch.22, SW seal welded bonnet, body ASTMA182 F22 + Stellite Gr.6, disk ASTMA182 F6 + Stellite Gr.6, with socket weld ends acc. to ANSI B16.11 execution acc. to fig. 6041

VK305250

Kolben-Ventil

VK305250 type BV 1078

Kolbenventil mit SW-Enden

ART10001 type BV 1039

Kolbenventil mit Flanschen

VD100050 / BV DN50

Satz von Ventilringen für das Kolbenventil

DN20, PN40 , RF A TYPE G11

SATZ VON SCHWÄNZEN, RECHTSHÄNDER

½” PN25

MANOMETER HAHN